We and selected third parties use cookies or similar technologies for technical purposes and, with your consent, also for other purposes as specified in the cookie policy.
As an access layer PoE switch, DH-PFS3010-8ET-96 supports simultaneous access of up to 8 cameras, and is applicable for monitoring scenarios such as office, school, hotel, supermarket, and hospital. DH-PFS3010-8ET-96-V2 provides eight 100 Mbps PoE Ethernet ports and two gigabit Ethernet ports.
Rich Port Types Eight 10/100 Mbps Base-T PoE Ethernet ports; two 10/100/1000 Mbps Base-T Ethernet ports.
Intelligent PoE The switch features intelligent PoE power consumption management to help keep the power and data flowing, even when the switch experiences a power fault. Intelligent PoE monitors the power consumption of the connected devices, and in the event of large power fluctuations, the switch shuts down one port at a time rather than shutting down all ports. Unlike typical switches that shut down all ports as once, this switch shuts down the highest number port first, then the next highest number until the switch detects the power consumption is below the PoE budget.
BT 90W The red port supports the IEEE802.3bt and the Hi-PoE standards. The maximum power consumption is 90 W.
PoE Watchdog The switch employs an innovative PoE watchdog function that automatically detects a network port failure and restarts network communication on the port. This functionality avoids manual maintenance and network restarts, saving time and reducing costs.
Long Distance PoE Long-distance PoE transmission extends the maximum transmission distance to 250 m (from 100 m), but reduces transmission speed to a maximum of 10 Mbps (from 1000 Mbps).
8-pin Assignment PoE Power Supply The 8-pin Ethernet port supports power supply, to enhance front-end and rear-end compatibility. Reduce cable loss and promote loading capacity.
LAN ports:
2 x RJ45 10/100/1000 Base-T - Uplink,
8 x RJ45 10/100 Base-T ( 1 x Hi-PoE (802.3bt) + 7 x PoE (802.3af/at) )
Management via WWW / console:
No
LED diodes:
Power, PoE, Link/Act
Transmission speed:
10 / 100 / 1000 Mbps : 2 LAN ports
10 / 100 Mbps : 8 LAN & PoE ports
Maximal total power:
96 W
MAC addresses table:
8k
Operation modes:
Extend On : 250 m, 10 Mbps
Extend Off : 100 m, 100 Mbps
Main features:
PoE power mode : The device supports 8-pin power supply
Intelligent management of Power Supply Unit power’s output stage
protection against lightning discharges and voltage differences and strokes between devices
PoE Watchdog / Tryb PD Alive mode - monitoring of the ports that power PoE devices and automatic restart by cutting off the power supply when an unresponsive device is detected
Kensington Lock
Certificates:
CE, FCC
Power supply:
53 V DC / 1.81 A (power adapter included)
Operation temp:
-10 °C ... 55 °C
Weight:
0.48 kg
Dimensions:
190 x 100 x 30 mm
Manufacturer / Brand:
DAHUA
https://www.liberotech.com/ww/dahua-pfs3010-8et-96-v2-unmanaged-switch-2-0-7-ports-poe-1-port-hi-poe-2-ports-10-100-1000mbps-96w-dip-switch.htmlPFS3010-8ET-96-V2Dahua PFS3010-8ET-96-V2 Unmanaged Switch 2.0 - 7 Ports PoE + 1 Port Hi-PoE + 2 Ports 10/100/1000Mbps 96W DIP Switch<p>As an access layer PoE switch, DH-PFS3010-8ET-96 supports simultaneous access of up to 8 cameras, and is applicable for monitoring scenarios such as office, school, hotel, supermarket, and hospital. DH-PFS3010-8ET-96-V2 provides eight 100 Mbps PoE Ethernet ports and two gigabit Ethernet ports.</p>
<p><strong>Rich Port Types</strong><br />Eight 10/100 Mbps Base-T PoE Ethernet ports; two 10/100/1000 Mbps Base-T Ethernet ports.</p>
<p><strong>Intelligent PoE</strong><br />The switch features intelligent PoE power consumption management to help keep the power and data flowing, even when the switch experiences a power fault. Intelligent PoE monitors the power consumption of the connected devices, and in the event of large power fluctuations, the switch shuts down one port at a time rather than shutting down all ports. Unlike typical switches that shut down all ports as once, this switch shuts down the highest number port first, then the next highest number until the switch detects the power consumption is below the PoE budget.</p>
<p><strong>BT 90W</strong><br />The red port supports the IEEE802.3bt and the Hi-PoE standards. The maximum power consumption is 90 W.</p>
<p><strong>PoE Watchdog</strong><br />The switch employs an innovative PoE watchdog function that automatically detects a network port failure and restarts network communication on the port. This functionality avoids manual maintenance and network restarts, saving time and reducing costs.</p>
<p><strong>Long Distance PoE</strong><br />Long-distance PoE transmission extends the maximum transmission distance to 250 m (from 100 m), but reduces transmission speed to a maximum of 10 Mbps (from 1000 Mbps).</p>
<p><strong>8-pin Assignment PoE Power Supply</strong><br />The 8-pin Ethernet port supports power supply, to enhance front-end and rear-end compatibility. Reduce cable loss and promote loading capacity.</p>https://www.liberotech.com/media/catalog/product/_/p/_p_f_pfs3010-8et-96-v2.jpg91.94outofstock91.9491.9400DAHUA000https://www.liberotech.com/media/catalog/product/_/p/_p_f_pfs3010-8et-96-v2.jpg296731337053/Networking/Networking/Wi-Fi and LAN routers/Networking/Wi-Fi and LAN routers/Poe switches/Video security/Video security/IP video surveillance/Video security/IP video surveillance/IP switches and accessories1687857554000232400
Buy everything you want in 3 interest-free installments with Scalapay