We and selected third parties use cookies or similar technologies for technical purposes and, with your consent, also for other purposes as specified in the cookie policy.
GSM / GPRS communication module. Connected directly to the MAGELLAN MG5000 / MG5050 control panels version 4.0 or higher, SPECTRA SP version 3.42 or higher and DIGIPLEX EVO version 2.02 allows communication via GSM / GPRS network.
Compact and elegant design
Allows communication to the Monitoring Center with the SIA and Contact ID formats
Combined with the VDMP3 voice communicator module, it is possible to send 5 voice messages (8 with the DIGIPLEX EVO control panel) of voice messages for alarm, aggression, fire, power failure and reset and central low battery. It also allows, via the VDMP3 module's voice menu, to switch the system on / off, activate outputs and know the status of the system
Sending SMS messages, for alarms with the zone name, arming / disarming with the user's name, faults and troubleshooting of 8 telephone numbers (16 if connected to the DIGIPLE EVO control panel)
Possibility to arm / disarm the system through SMS messages with confirmation message
Information for remaining credit and SIM expiry
Using the GPRS network, remote control of the control panel is possible using the WinLoad, NEware and BabyWare software
Display of module status and GSM / GPRS signal level
Central firmware update and PSC250 module via GPRS network
Allows transmission of reports to the digital receiver on an IP network for the PARADOX model IPR512 control panels and to the IPRS-7 software
Through the CVT485 module it can be installed up to 300m from the control panel
The use of an additional external power supply is recommended
https://www.liberotech.com/ww/paradox-pcs250-gsm-gprs-communication-module-pxvpcs25.htmlPXVPCS25Paradox PCS250 GSM / GPRS communication module - PXVPCS25<p> GSM / GPRS communication module. Connected directly to the MAGELLAN MG5000 / MG5050 control panels version 4.0 or higher, SPECTRA SP version 3.42 or higher and DIGIPLEX EVO version 2.02 allows communication via GSM / GPRS network. </p><ul><li> Compact and elegant design </li><li> Allows communication to the Monitoring Center with the SIA and Contact ID formats </li><li> Combined with the VDMP3 voice communicator module, it is possible to send 5 voice messages (8 with the DIGIPLEX EVO control panel) of voice messages for alarm, aggression, fire, power failure and reset and central low battery. It also allows, via the VDMP3 module's voice menu, to switch the system on / off, activate outputs and know the status of the system </li><li> Sending SMS messages, for alarms with the zone name, arming / disarming with the user's name, faults and troubleshooting of 8 telephone numbers (16 if connected to the DIGIPLE EVO control panel) </li><li> Possibility to arm / disarm the system through SMS messages with confirmation message </li><li> Information for remaining credit and SIM expiry </li><li> Using the GPRS network, remote control of the control panel is possible using the WinLoad, NEware and BabyWare software </li><li> Display of module status and GSM / GPRS signal level </li><li> Central firmware update and PSC250 module via GPRS network </li><li> Allows transmission of reports to the digital receiver on an IP network for the PARADOX model IPR512 control panels and to the IPRS-7 software </li><li> Through the CVT485 module it can be installed up to 300m from the control panel </li><li> The use of an additional external power supply is recommended </li></ul>https://www.liberotech.com/media/catalog/product/_/p/_p_c_pcs250.jpg217.25outofstock217.25217.2500PARADOX000https://www.liberotech.com/media/catalog/product/_/p/_p_c_pcs250.jpg77287729/Alarms and security/Alarms and security/Communication GSM - LAN - WIFI - VOCE1687857747000770800
Buy everything you want in 3 interest-free installments with Scalapay